How To Flash or Unbrick All Android Phones and Tablets

Have you been searching all around for quick and easy steps to flash or unbrick any kind of Android phone or tablet? Then this post is for you.

The method I am going to analyze below has been tested and confirmed working extremely well on phones like the Infinix, Tecno, Gionee, LG, Samsung and iTel.

How To Flash or Unbrick All Android Phones and Tablets

I will only share with you the quick and easiest method to do this and bring back your device no matter how stubborn it is.

DONT MISS THIS==>  Latest List Of Best Smartphones in March - TechPill

Best Method to Flash/Fix Bricked Android Phones & Tablets

What We Needed:

  1. MT6577 USB VCOM Driver (W7/Vista/XP): Download
  2. MT6577 USB VCOM Driver (W8 + W10): Download
  3. USB data cable
  4. SP Flash Tool: Download

First, make sure that you have MediaTek USB VCOM drivers installed on your PC

mediatek-usb-vcom-drivers

How To Start Flashing New ROM

DONT MISS THIS==>  How to Get Free Ringtones From iTunes on LG phones

==> Go to the SP Flash Tool to open it (DON’T connect the phone yet)

==> Click “Scatter-loading” button to load the scatter file provided in the downloaded ROM ( you may see something like MT6575_Android_scatter_emmc.txt OR MT6577_Android_scatter_emmc.txt, all depending on the type of phone you have)

==> Ignore any message that may appear

DONT MISS THIS==>  Infinix S2 Pro Specifications; the "Wefie" device with two front cameras (All You Need To Know)

sp-flash-tool-photo-2

==> Turn off the phone, remove the battery and replace it after some seconds (but don’t turn it ON).

==> Press F9 OR hit the “Download” button)

sp-flash-tool-photo-1

==> Connect your phone into the computer via USB data cable.

==> The process will start and a red progress bar will appear

DONT MISS THIS==>  How To Format Micro SD Card For Use As Internal Storage on Android 6.0 Marshmallow

sp-flash-tool-photo-3

==> After the red progress bar is complete, there will appear a purple progress bar (stay calm)

sp-flash-tool-photo-4

==> Right after the purple progress bar is complete, a message will appear underneath that reads:

Please insert USB cable in x seconds

==> Immediately after that, the download will start and you will see a yellow progress bar filling up

sp-flash-tool-photo-5

==> When the yellow progress bar is complete, you will see a pop-up with a green circle and Download OK message, which means that the flashing process is successful 🙂

DONT MISS THIS==>  Is It Possible To Charge Your Phone With A Lemon?

sp-flash-tool-photo-6

==> You can now safely disconnect the phone from the USB cable and turn it on.

The process ends here.

If you have any question(s), I will be here to guide you during the flashing process and even after it.

Never Miss An Update; Like Our Facebook Page Or Follow Us On Twitter. You Can As Well Subscribe To Our YouTube Channel To Get 1st Hand Information.

Subscribe Now With Your Email To Receive Free Updates!!!

SHARE
Samuel Afolabi is a tech savvy that loves writing almost all tech related kinds of stuff. He is the Editor-in-Chief of TechLector. You can connect with him via the social buttons below :)

1 COMMENT

  1. Please i need help, am rebooting my tecno ipad but after it shows me to put my email and password i used be fore it opens, when i put it, it fails to open. what can i do to open it up. thanks

LEAVE A REPLY

Please enter your comment!
Please enter your name here