Xiaomi Redmi Go VS ZTE Blade A622: Budget Phones With Average Memory

If you look carefully, you will notice that the ZTE Blade A622 and the newly launched Xiaomi Redmi Go looks similar both on the body and even on the inside. Both phones fall under a budget device with average specifications and decent body design. We will be looking at the comparison between the ZTE Blade A622 and the Xiaomi Redmi Go to see which one will make a good budget buy.

Xiaomi Redmi Go
Xiaomi Redmi Go
ZTE Blade A622
ZTE Blade A622

Xiaomi Redmi Go VS ZTE Blade A622: Design Comparison

On the design, the Xiaomi Redmi Go is built with the combination of Aluminium alloy, and Plastic, while the ZTE Blade A622 is built with all plastic. Both phones have a big notch both on the top and bottom of their screen. The Xiaomi Redmi Go measures 70.09 mm x 140.4 mm x 8.4 mm in dimensions and weighs 157 gram and it's available in Black and Blue colors, while the ZTE Blade A622 measures 71 mm x 147 mm x 8.5 mm in dimensions and weighs 160 gram and it's the only one that has a fingerprint scanner.

Xiaomi Redmi Go VS ZTE Blade A622: Display Comparison

The Xiaomi Redmi Go has a screen size of 5.0 inches with a resolution of 1280 x 720 Pixels and 294 PPI density, whereas the ZTE Blade A622 has a screen size of 5.2 inches with a resolution of 1280 x 720 Pixels and 282 PPI density. Both phones are equipped with the same IPS capacitive touchscreen, display protection, and a similar screen to body ratio.

READ ⇒
(Promotion) Xiaomi Mi Note 10 / CC9 Pro: Exclusive Gearbest! (450 €)

Xiaomi Redmi Go VS ZTE Blade A622: Camera Comparison

The Xiaomi Redmi Go has a rear camera of 8 Megapixels with an LED flash and a front facing camera of 8 Megapixel with F2.2 Aperture, while the ZTE Blade A622 has a rear camera of 13 Megapixels with an LED flash and a front facing camera of 5 Megapixel with an LED flash as well. The ZTE Blade A622 has the point. The handset will take better photos than later.

Xiaomi Redmi Go VS ZTE Blade A622: Performance Comparison

The Xiaomi Redmi Go has a Qualcomm Snapdragon 425 MSM8917 chipset with Quad-Core 1.4GHz processor and Qualcomm Adreno 308 for graphics, while the ZTE Blade A622 has a Qualcomm Snapdragon 425 MSM8917 chipset with Quad-Core 1.4GHz processor and Qualcomm Adreno 308 GPU for graphics. The Xiaomi Redmi Go has 1GB RAM with internal memory of 8GB which is expandable up to 128GB, while the ZTE Blade A622 has 3GB RAM with inbuilt storage of 16GB which is also expandable as well. Both phones support 4G LTE network with additional slot for dual SIMs. The Redmi Go runs on Android 8.1 Oreo Go Edition while the ZTE Blade A622 runs on Android 7.1 Nougat operating system.

Xiaomi Redmi Go VS ZTE Blade A622: Battery & Price Comparison

The Xiaomi Redmi Go has a nonremovable battery capacity of 3000 mAh, while the ZTE Blade A622 has a nonremovable battery capacity of 5000 mAh without fast charging technology as well. The Redmi Go will sell at a price of $80, while the ZTE Blade A622 will cost around $180.

READ ⇒
Xiaomi Mi A3 Review: A Smartphone To Be Reckoned With

Buy Redmi Go & Pay On Delivery: View Offer On GearBest

Buy ZTE Blade A622 & Pay On Delivery: View Offer On GearBest

Our Verdict:

The Xiaomi Redmi Go is an affordable smartphone with low inbuilt memory and RAM.
The phone won't be able to handle Apps and other gaming activities like the ZTE Blade A622 will. So, the ZTE Blade A622 has the point and it will perform better than it's rival. The Redmi Go is more affordable though and it's not looking bad on its body.

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. AcceptRead More